Plinths
View as Grid View List View

Items 37-48 of 180

per page
Set Descending Direction
  1. Part No. 8620091
    H: 100 mm (3.9 ˝) Cover: No
    Base/plinth trim panels, vented For VX base/plinth systems
    For enclosure ventilation through the base/plinth. If the base/plinth height is 200 mm,...
  2. Part No. 8620092
    H: 100 mm (3.9 ˝) Cover: No
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  3. Part No. 8620093
    H: 100 mm (3.9 ˝) Cover: No
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  4. Part No. 8620094
    H: 100 mm (3.9 ˝) Cover: No
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  5. Part No. 8620095
    H: 100 mm (3.9 ˝) Cover: No
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  6. Part No. 8620100
    Cover: No
    Filter mat For base/plinth trim panels, vented
    The filter mat can be easily inserted into the trim panel from the rear. Can be shortened...
  7. Part No. 8620400
    Cover: No
    Base/plinth expansion angle For VX base/plinth systems, sheet steel and stainless steel
    For upgrading the base/plinth with system chassis or cable clamp rail. Suitable for 100...
  8. Part No. 8100710
    H: 100 mm Cover: No
    Leveling component For VX base/plinth systems
    For subsequent leveling on uneven floors at the installation site up to a maximum of ...
  9. Part No. 8100711
    H: 200 mm Cover: No
    Leveling component For VX base/plinth systems
    For subsequent leveling on uneven floors at the installation site up to a maximum of ...
  10. Part No. 8100770
    Cover: No
    Base/plinth adapter For twin castors and leveling feet
    For mounting the twin castors and leveling feet to the VX base/plinth system.
  11. Part No. 7825601
    H: 100 mm (3.9 ˝) Cover: No
    Base/plinth components, front and rear, 100 mm Carbon steel, for TS, TS IT, SE, CM, TP, PC, IW, TE
    Base/Plinth component consisting of one trim panel and two pre-assembled corner pieces.
  12. Part No. 7825801
    H: 100 mm (3.9 ˝) Cover: No
    Base/plinth components, front and rear, 100 mm Carbon steel, for TS, TS IT, SE, CM, TP, PC, IW, TE
    Base/Plinth component consisting of one trim panel and two pre-assembled corner pieces.
Local Distributor