Plinths
Category
Select Categories
Height
Width
Depth
Material
Protection category IP
Protection category NEMA
View as Grid View List View

Items 1-12 of 180

Page
per page
Set Descending Direction
  1. Part No. 2801200
    H: 100mm (3.94") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  2. Part No. 2802200
    H: 200mm (7.87") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  3. Part No. 2816200
    H: 100mm (3.94") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  4. Part No. 2818200
    H: 100mm (3.94") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  5. Part No. 2826200
    H: 200mm (7.87") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  6. Part No. 2828200
    H: 200mm (7.87") W: 279mm (10.98") D: 279mm (10.98")
    Cover: No
    Base/Plinth, Complete Sheet steel, for AE, TP universal consoles
    Trim panels at the front and rear with fitted corner pieces and side trim panels.
  7. Part No. 2865000
    H: 100mm (3.94") Cover: No
    Base/plinth, complete, 100 mm Stainless steel, for one-piece consoles
    Where necessary, two base/plinths can be installed above one another.
  8. Part No. 2867000
    H: 100mm (3.94") Cover: No
    Base/plinth, complete, 100 mm Stainless steel, for one-piece consoles
    Where necessary, two base/plinths can be installed above one another.
  9. Part No. 2869000
    H: 100mm (3.94") Cover: No
    Base/plinth, complete, 100 mm Stainless steel, for one-piece consoles
    Where necessary, two base/plinths can be installed above one another.
  10. Part No. 2870000
    H: 100mm (3.94") Cover: No
    Base/plinth, complete, 100 mm Stainless steel, for one-piece consoles
    Where necessary, two base/plinths can be installed above one another.
  11. Part No. 2891000
    Cover: No
    Leveling component for plinth TS
    Retrofitted in the corner piece to compensate for any irregularities up to max. 15 mm...
  12. Part No. 2892000
    Cover: No
    Leveling component for plinth TS
    Retrofitted in the corner piece to compensate for any irregularities up to max. 15 mm...
Local Distributor