Network/Server Enclosure Accessories
Extensive Range of Cabinet Accessories

From airflow, accessibility and mounting, Rittal accessories customize your cabinet to your specifications.

Items 37-48 of 528

per page
Set Descending Direction
  1. Part No. 8620094
    H: 100 mm (3.9 ˝)
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  2. Part No. 8620095
    H: 100 mm (3.9 ˝)
    Base/Plinth Trim Panels with Brush Strip For VX base/plinth systems
    The 100 mm high base/plinth trim panels can be used in the depth or the width for cable...
  3. Part No. 8620100
    Filter mat For base/plinth trim panels, vented
    The filter mat can be easily inserted into the trim panel from the rear. Can be shortened...
  4. Part No. 8620400
    Base/plinth expansion angle For VX base/plinth systems, sheet steel and stainless steel
    For upgrading the base/plinth with system chassis or cable clamp rail. Suitable for 100...
  5. Part No. 8100700
    Transport castors For VX base/plinth systems
    For fitting on the base/plinth corner piece, height 100 or 200 mm.
  6. Part No. 8100710
    H: 100 mm (3.9 ˝)
    Leveling component For VX base/plinth systems
    For subsequent leveling on uneven floors at the installation site up to a maximum of ...
  7. Part No. 8100711
    H: 200 mm (7.9 ˝)
    Leveling component For VX base/plinth systems
    For subsequent leveling on uneven floors at the installation site up to a maximum of ...
  8. Part No. 8100770
    Base/plinth adapter For twin castors and leveling feet
    For mounting the twin castors and leveling feet to the VX base/plinth system.
  9. Part No. 7825360
    D: 237.5 mm (9.4 ˝)
    Base plate modules, vented for TS, TS IT, SE
    Base plate module, vented for TS, TS IT, SE, for use in network enclosure base frames....
  10. Part No. 7825380
    D: 237.5 mm (9.4 ˝)
    Base plate modules, vented for TS, TS IT, SE
    Base plate module, vented for TS, TS IT, SE, for use in network enclosure base frames....
  11. Part No. 7825381
    D: 237.5 mm (9.4 ˝)
    Base plate modules for cable entry for TS, TS IT, SE
    Base plate module for cable entry for TS, TS-IT, SE, for use in the base frame of the...
  12. Part No. 7825250
    Stabilizer for TS IT
    Stabilizer for TS server enclosures. The pull-out stabilizer is quickly and easily retrofitted...
Local Distributor