TS 8 Flange Mount Disconnect Enclosure

TS 8 Flange Mount Disconnect Enclosure

-

9951131 / H: 1400mm (55.12") W: 1000mm (39.37") D: 500mm (19.69")

$100.00
DescriptionIncludes operator handle interlocking kit to securely lock most commercially available operator handles to enclosure and door latch
BenefitsA rigid trim door to accept a variety of high and low amperage operator handles
Blank adapter plate option for non-disconnect conversions
Easy-to-follow installation instructions for a variety of operator handle manufacturers
Enhanced and greatly simplified hardware installation
Expandable and modular enclosure compatible with all standard TS 8 accessories
Hinged and side access behind the operator handle cutout to make mounting the operator handle and connecting hardware easier
Optional high amperage adapter plate allowing future system upgrade without performing additional cutouts in the field while maintaining Type 12 rating
Reduced width hinged trim door design for more usable panel mounting space
ApplicationsThe below operating handles represent the most common applications. Most commercially available operator handles will fit as well. Please contact Rittal if you have a specific model not shown
Low AMP Operator Handles
- Allen Bradley: 140G (≤400A) 1494C (≤200A) 1494F M1/P1/S1 1494U H M1/P1/S1 1494V (≤200A) 194R
- ABB: DSFHN-HS OHF1C 2
- Eaton: C361 C371 Flex Shaft CH
- GE: SCH1/SCH2 SCOM SDOM STDA TDOM
- Siemens: FDH10/FDH20 FHOH MFHM3RS/MFHM4X
- Square D: 9422 Type A1/A3/A9 9422 Type A2/A4/A10
High AMP Operator Handles
- Allen Bradley: 140G (600 - 1200A) 1494C (400 - 600A) 1494F M2/S2 1494V (400 - 600A)
- ABB: K7FCH
- Siemens: FHOHN MFHP3R/MFHP4X VBH2
MaterialDoor: Carbon steel 2.0 mm
Enclosure frame: Carbon steel 1.5 mm
Rear wall: carbon steel 1.5 mm
Roof: Carbon steel 1.5 mm
Base plates: Carbon steel 1.5 mm
Mounting plate: Carbon steel 3.0 mm
Surface finish Door roof and rear panel: Dipcoat-primed powder-coated on the outside textured paint
Enclosure frame: Dipcoat-primed
Mounting plate and base plates: Zinc-plated
ColorRAL 7035
Protection category IP to IEC 60 529IP 55
Protection category NEMA:NEMA 12
Supply includesMounting plate
4 eyebolts
Rear panel
Enclosure frame TS 8 with doors and roof plate
Flange Door with Low Amperage Adapter Plate pre-installed
Gland plate
Padlock Comfort handle
Ride-Up Roller 4538000 pre-installed
DimensionsHeight: 1400 mm (55 ")
Width: 1000 mm (39 ")
Depth: 500 mm (20 ")
Number of doors1
Packaging unit1 pc(s).
Weight/packaging unit136 kg
More Info
Approvals
UL + C-UL

Drawings

Format Dimension Drawing Filename  
DWG 9951131_rittal-dwg-drawing.zip Download
Data sheets
Product data sheet
Documentation
Additional Instructions
Instructions TS
Load brochure
PE conductor brochure