Section for cable entry, rear for TS, SE, CM, TP

Section for cable entry, rear for TS, SE, CM, TP

Inserted in base opening.


DescriptionTo seal the cable entry on the base opening.
BenefitsParticularly well-suited to cables with identical cross-sections
When installing the mounting plate in the rearmost position the cables may be routed directly without large bending radii.
ApplicationsMount directly on the base opening/base tray and base plate
MaterialExtruded aluminum section
Foam rubber cable clamping profile: PU foam
Technical specificationsFoam rubber cable clamping profile: Cross-section: 30 x 25 mm
Protection category IP to IEC 60 529IP 55 if correctly installed
Supply includesPlug-in sections incl. foam rubber clamp strip
Enclosure typeCM
TS 8
Suitable for1600 mm (63 ")
Notes2 pc(s). are sufficient for one base opening up to an enclosure width of 800 mm
From an enclosure width of 1 000 mm two base openings are provided. 4 units per enclosure may be fitted
Packaging unit4 pc(s).
Weight/packaging unit0.6 kg (1.3 lb.)
Customs tariff number76042990
ETIM 6.0EC002624
ETIM 5.0EC002624
eCl@ss 8.0/8.127189265
eCl@ss 7.0/7.127400604
eCl@ss 6.0/6.127400604
eCl@ss 5.1/5.1.427189222
Product description (long)TS Section for cable entry rear for TS SE CM TP for W: 1600 mm
More Info


Format Dimension Drawing Filename  
Open CAD drawing in new tab