Base/plinth expansion angle For VX base/plinth systems, sheet steel and stainless steel

Base/plinth expansion angle For VX base/plinth systems, sheet steel and stainless steel

For upgrading the base/plinth with system chassis or cable clamp rail. Suitable for 100 and 200 mm high base/plinth trim panels made from sheet steel or stainless steel.

8620400

$100.00
DescriptionFor upgrading the base/plinth with system chassis or cable clamp rail. Suitable for 100 and 200 mm high base/plinth trim panels made from sheet steel or stainless steel.
MaterialStainless steel 1.4301 (AISI304)
Supply includesAssembly components
2 x installation angle brackets
2 x installation angle brackets for cable clamp rails
NotesThe expansion angle is not needed for base/plinth trim panels rotated through 90° as the system perforation in the base/plinth trim panels can be used directly in this position
For interior installation on standing base/plinth trim panels
Suitable for base/plinth100 mm (3.9 ")
Weight/packaging unit0.23 kg (0.5 lb.)
ETIM 5.0EC000721
eCl@ss 8.0/8.127189234
eCl@ss 6.0/6.127189234
Product description (long)VX Base/plinth installation bracket for base/plinth sheet steel and stainless steel for base/plinth trim panels H: 100 / 200 mm
More Info

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Documentation
Info sheet
EPLAN Data Portal