PSM Measurement Bar for CMC III

PSM Measurement Bar for CMC III

One or two infeeds, with one or three phases; redundant when the plug-in module's direction of connection is changed. With measurement option in conjunction with the CMC III system.

7859053

$100.00
Temperature range-25°C...+70°C
VersionConnection cable static 3 m with CEE connector 32 A single-phase (IEC60309)
DescriptionMeasurement bars for direct connection to the CMC III system. With a PSM mounting kit the measurement bar may be vertically mounted in 2 000mm high TS 8 or TS IT racks. Display and monitoring of all major output parameters is supported separated by phase and infeed. An integral display provides a local on-site display in the rack. Remote administration and network connectivity are created via the CMC III system.
BenefitsCAN bus for direct connection to CMC III system (RJ 45 2 x socket)
Easy to mount
Energy-efficient electric design – minimal inherent power consumption
Extensive management and monitoring functions (via CMC III)
For 16 A and 32 A phase current
High-MTBF and measurement accuracy of 1%
High-quality aluminum housing for flexible mounting
Max. 8 systems may be connected to one CMC-PU III
Modular system
Power supply via CMC III system (24 V DC)
PSM modules may be connected with the system operational
Various PSM connection modules (pin patterns)
VDE-tested shock hazard-protected system
MaterialAluminum extruded section natural anodized
Suitable forTS IT
TS 8
Height2000 mm (79 ")
Type of connection (electrical)CEE
Rated current (max.)32 A
Packaging unit1 pc(s).
Weight/packaging unit5.98 kg (13.2 lb.)
EAN4028177677586
Input voltage230 V 50/60 Hz
Customs tariff number85369001
ETIM 6.0EC000215
ETIM 5.0EC000215
eCl@ss 8.0/8.127371306
eCl@ss 7.0/7.127371306
eCl@ss 6.0/6.127371306
eCl@ss 5.1/5.1.427143401
Product description (long)DK PSM measurement bar 230 V 1~ 32 A 50/60 Hz Infeed: 1 For H: 2000 mm
Phases per infeed1~
Qty.1
StandardsEN 55 022
EN 60 950
EN 61 000-6-1
EN 61 000-6-2
Circuit-breaker 16 A (qty.)2
Measurement functionsActive power active energy apparent power apparent energy
Measurement per phase or infeed
Neutral conductor measurement/load imbalance detection
Power factor (cos phi)
Voltage V current A frequency Hz
Module slots (max.)6
GuidelinesEMC Directive 2014/30/EU
Low-Voltage Directive 2014/35/EU
Protection category IP to IEC 60 529IP 20
Temperature range+0°C...+45°C
Length of connection cable3 m
Temperature range10% - 95%
More Info
Certificates
EAC
Declarations
Declaration of conformity

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Technical system catalogue
Documentation
Instructions
Safety instructions
EPLAN Data Portal