PSM Busbars

PSM Busbars

One or two infeeds, with one or three phases; redundant when the plug-in module's direction of connection is changed. With measurement option in conjunction with the CMC III system.

7856321

$100.00
Temperature range-20°C...+60°C
VersionWith 3 m connection cable (connector type CEE/EN 60 309)
DescriptionThe modular system enables basic configuration of the racks using a vertical support rail with single/three-phase infeed. The different socket modules can be snapped into position in the support rail to supply the active components. This can be carried out even while the system is in operation as the support profile is designed with contact hazard protection.
BenefitsModules may be retrofitted whilst system is operational.
MaterialAluminum section natural anodized
Suitable forTS IT
TS 8
Height2000 mm (79 ")
Type of connection (electrical)CEE
Rated current (max.)32 A
Packaging unit1 pc(s).
Weight/packaging unit5.62 kg (12.4 lb.)
EAN4028177552906
Customs tariff number85369001
Product description (long)DK PSM busbar 6-way 1~ 32 A Infeed: 1 For H: 2000 mm
Phases per infeed1~
Qty.1
Technical specifications3-phase redundant infeed supported.
Depending on the design single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
Each socket module picks off a phase on the support rail either from infeed or from the redundant infeed depending on the direction of connection.
Modules may be equipped with integral overcurrent protection so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
The redundant circuit is completely separate from the 3 phases of the support rail.
Circuit-breaker 16 A (qty.)2
Module slots (max.)6
Temperature range+5°C...+45°C
Length of connection cable3 m
Temperature range5% - 95%
More Info
Approvals
VDE
Certificates
EAC
Declarations
Declaration of conformity
Open CAD drawing in new tab
Data sheets
Technical system catalogue
Documentation
Instructions
Safety instructions