One or two infeeds, with one or three phases; redundant when the plug-in module's direction of connection is changed. With measurement option in conjunction with the CMC III system.
|Version||With 2 infeeds (socket) 3-phase redundancy|
|Description||The modular system enables basic configuration of the racks using a vertical support rail with single/three-phase infeed. The different socket modules can be snapped into position in the support rail to supply the active components. This can be carried out even while the system is in operation as the support profile is designed with contact hazard protection.|
|Benefits||Modules may be retrofitted whilst system is operational.|
|Material||Aluminum section natural anodized|
|Suitable for||TS IT|
|Height||2200 mm (87 ")|
|Type of connection (electrical)||WAGO X-COM|
|Rated current (max.)||16 A|
|Packaging unit||1 pc(s).|
|Weight/packaging unit||3.83 kg (8.4 lb.)|
|Customs tariff number||85369001|
|Product description (long)||DK PSM busbar 8-way 3~ 16 A Infeed: 2 For H: 2200 mm|
|Phases per infeed||3~|
|Technical specifications||3-phase redundant infeed supported.|
Depending on the design single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
Each socket module picks off a phase on the support rail either from infeed or from the redundant infeed depending on the direction of connection.
Modules may be equipped with integral overcurrent protection so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
The redundant circuit is completely separate from the 3 phases of the support rail.
|Module slots (max.)||8|
|Temperature range||Ambient temperature range: +5°C...+45°C|
Operation (environment): 5% - 95%