CMC III Sensors

CMC III Sensors

To monitor a range of parameters in enclosures or rooms

7320530 / H: 20mm (0.79") W: 78mm (3.07") D: 18mm (0.71")

$100.00
DescriptionThe CMC III sensors monitor the physical ambient conditions. Each sensor has specific measurement or control tasks. Sensors with the initial order numbers 7030... are equipped with a CAN bus interface and can be connected directly into the bus to Processing Unit III. Sensors with the initial order numbers 7320... must be integrated into the bus via the adaption CAN bus sensor 7030.100.
BenefitsFast connection and automatic detection via plug & play
Power is supplied via the CAN bus interface.
ApplicationsMonitoring enclosures in the fields of IT industry and buildings technology.
Monitoring enclosures rooms and containers in the field of IT.
Function principleSettings can be made via the CMC III Processing Unit
A red LED indicates when the magnet has not been detected and the door is therefore open.
The CMC-TC sensor is mounted on the enclosure frame. A magnetic counterpart is bonded onto the door.
The sensor detects whether the magnetic counterpart is up against the sensor and therefore whether the door is closed.
MaterialMaterial: Plastic
Material: Front: Smooth
Housing: Textured
ColorHousing: transparent
Protection category IP to IEC 60 529IP 40
Supply includesSupply includes: Installation and Short User's Guide
Sensor
Supply includes: Assembly components
Mounting Bracket
Connection cable with connector
Jumper plug
NoteThe sensor is connected to the CMC III via a CMC III CAN bus sensor.
Up to 5 CMC-TC access sensors can connected in series to one CMC III CAN bus sensor.
DimensionsHeight: 20 mm (0.79 ")
Width: 78 mm (3.1 ")
Depth: 18 mm (0.71 ")
Connection to the CAN busIndirectly via CMC III Can-Bus Interfaces
Maximum no. of consumersCMC III Processing Unit Compact: 4
Note: The number of participants increases as up to 5 sensors can be connected in series. However sensors connected in series emit only one signal.
CMC III Processing Unit: 32
Note: The number of participants increases as up to 5 sensors can be connected in series. However sensors connected in series emit only one signal.
Rated operating voltage24VDC
Temperature range+5°C...+45°C
Ambient humidity (non-condensing)5% - 95%
Measuring techniqueReed Contact Magnet
Interfaces/connectionsRJ12
Packaging unit2 pc(s).
Weight/packaging unit0.49 kg (1.1 lb.)
EAN4028177367272
Customs tariff number85319000
ETIM 6.0EC002627
ETIM 5.0EC002627
eCl@ss 8.0/8.127189253
eCl@ss 7.0/7.127189253
eCl@ss 6.0/6.127189253
eCl@ss 5.1/5.1.427189253
Product description (long)DK CMC-TC Access sensor
More Info
Certificates
EAC
Declarations
Declaration of conformity
Open CAD drawing in new tab
Data sheets
Technical data sheet
Documentation
Instructions
EPLAN Data Portal