Socket strip in an aluminum duct

Socket strip in an aluminum duct

The outlet strip in an aluminum duct is available in various lengths with different functional elements, variable mounting options.

7240240 / H: 44mm (1.73") W: 44mm (1.73") D: 44mm (1.73")

$100.00
Number of sockets5
Dimensions44 mm (1.7 ")
VersionWith circuit breaker B16 2-pole 10 kA
DescriptionThe socket strips are available in various country-specific variants with different functional elements. Special attention has been devoted to practical universal fastening: Variable attachment facilities have been created with an angle bracket that can be inserted in four positions. Hence for example the 482 mm long socket strip may optionally be mounted on 482.6mm (19") profile rails the 482.6 mm (19") mounting frame on the enclosure frame or in the rear section of the wall-mounted distributor. The outlet strip can be used on any profile with 25mm hole pattern no additional mounting accessories are required. This makes selection much easier as well as providing additional flexibility and saving on warehousing. Provision has also been made for cable routing of the infeed and when mounting in the 482.6mm (19") section there is adequate space to route the infeed between the socket strip and the profile rail without kinks. The arrangement of the Schuko sockets at a 45° angle allows unrestricted use of angular connectors.
MaterialAluminum section natural anodized
Socket inserts: Polycarbonate
Rated voltage230 V AC
Supply includesAssembly components
Socket strip
Two mounting brackets
NoteDepending on the application it is advisable to keep some load current in reserve to prevent nuisance tripping as a result of peak inrush currents
The mounting distance is variable across a range of 25 mm the distance specified is the center - center distance of the holes in the mounting brackets
Type of connection (electrical)Wire end ferrules
Rated current (max.)16 A
Packaging unit1 pc(s).
Weight/packaging unit1.07 kg (2.4 lb.)
EAN4028177221192
Customs tariff number85369095
ETIM 6.0EC000330
ETIM 5.0EC000330
eCl@ss 8.0/8.127142604
eCl@ss 7.0/7.127142604
eCl@ss 6.0/6.127142604
eCl@ss 5.1/5.1.427143401
Installation options482.6 mm (19") level
Enclosure frame
IT wall-mounted distributor at the rear horizontal (adequate width provided)
Components with a 25 mm pitch pattern
Product description (long)DK Socket strip CEE 7/3 (type F) 5-way 250 V 16 A LHD: 482 6x44x44 mm With circuit-breaker B16 2-pole 10 kA
Tolerance25 mm (0.98 ")
Length482.6 mm (19 ")
StandardsSockets: DIN VDE 0620-1
Connection cable (type)H05VV-F3G1.5
Mounting dimensions452.5 mm (18 ")
Number of sockets and type5 x ground pin type F CEE 7/3
Socket colorGray
Dimensions44 mm (1.7 ")
Length of connection cable2 m (79 ")
Jack/outlet (type)D ground pin (type F CEE 7/3)
More Info
Approvals
VDE
Certificates
EAC
Declarations
Declaration of conformity

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Technical system catalogue
Documentation
Safety instructions
EPLAN Data Portal