CMC III Power Units

CMC III Power Units

To measure current/energy and to activate/de-activate consumers, such as fans.

7030050 / H: 40mm (1.57") W: 138mm (5.43") D: 132mm (5.20")

$100.00
DescriptionThe input is switched to the outputs by two relays. In this way the outputs can be linked with measurements and therefore switched automatically. Fan control is one application example. Manual switching via the CMC III user interface is also possible. Each output is individually monitored and different values are measured.
BenefitsFast connection and automatic detection via plug & play
Function principleStatus display via integral LED
Controlling and switching fans heaters equipment
Measures voltage current power work
Power is supplied via the CAN bus interface.
Switches 2 outputs
MaterialPlastic
Front: Smooth
Housing: Textured
ColorFront: RAL9005
Housing: RAL 7035
Protection category IP to IEC 60 529IP 30
Supply includesMounting clips for support rails
CMC III Power Unit
Mounting accessories for mounting on surfaces
Operating manual
DimensionsHeight: 40 mm (1.6 ")
Width: 138 mm (5.4 ")
Depth: 132 mm (5.2 ")
Maximum no. of consumers16
Rated operating voltage100V - 230V 1~ 50Hz/60Hz
Installation dimensionsInstallation depth: 120 mm (4.7 ")
Build depth: 12 mm (0.47 ")
Temperature range+0°C...+55°C
Ambient humidity (non-condensing)5% - 95%
Pre-fuse10 A
ConnectionsInput: Non-heating apparatus connector C14
Output: 2 x Non-Heating Apparatus Socket C13 Switchable
Number of connections2
Measurement rangeVoltage: 100V - 230V
Frequency: 0Hz - 60Hz
Amperage: 200mA - 10A
cos φ: 0° - ±90°
Active power: 46W - 2 3kW
Energy consumption: 0kWh - 1000000kWh
Interfaces/connections2 x RJ45 CAN bus
Packaging unit1 pc(s).
Weight/packaging unit0.58 kg (1.3 lb.)
EAN4028177659377
Customs tariff number85311095
Product description (long)DK CMC III Power Unit For power supply and controlling IT equipment via CMC III Input: C14 100-230 V 10 A 50/60 Hz Output: 2x C13 100-230 V in total up to 10 A 50/60 Hz
More Info
Declarations
Declaration of conformity

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Graphics
Documentation
Brief instruction
EPLAN Data Portal