CMC III I/O Units
CMC III I/O Units
With 8 digital inputs and 4 relay outputs.
7030040
/ H: 40mm (1.57")
W: 138mm (5.43")
D: 132mm (5.20")
$0.00
Description | Monitoring of up to eight digital inputs and control of up to four relays. In the software the relays can be linked to measurement values so that they are actuated under certain circumstances. This allows devices to be monitored and messages to be forwarded. |
---|---|
Benefits | Fast connection and automatic detection via plug & play Minimal space requirements due to high concentration of inputs and outputs |
Function principle | Status display via integral LED Power is supplied via the CAN bus interface. Automatic bus sequence with consecutive numbering by the processing unit Inputs for ground-free signals Relay output (changeover contact) can handle loads of up to 24 V (DC)/1 A |
Material | Plastic Front: Smooth Housing: Textured |
Color | Front: RAL9005 Housing: RAL 7035 |
Protection category IP to IEC 60 529 | IP 30 |
Supply includes | Mounting accessories for mounting on surfaces Operating manual CMC III I/O Unit |
Dimensions | Height: 40 mm (1.6 ") Width: 138 mm (5.4 ") Depth: 132 mm (5.2 ") |
Maximum no. of consumers | 16 |
Installation dimensions | Installation depth: 120 mm (4.7 ") Build depth: 12 mm (0.47 ") |
Temperature range | +0°C...+55°C |
Ambient humidity (non-condensing) | 5% - 95% |
Interfaces/connections | General aspects: 4 relay outputs (max. 24 V DC/1 A) 8 digital inputs Interface bus system: 2 x RJ45 CAN bus |
Packaging unit | 1 pc(s). |
Weight/packaging unit | 0.62 kg (1.4 lb.) |
EAN | 4028177659360 |
Customs tariff number | 85311095 |
ETIM 6.0 | EC002627 |
ETIM 5.0 | EC002627 |
eCl@ss 8.0/8.1 | 27189253 |
eCl@ss 7.0/7.1 | 27189253 |
eCl@ss 6.0/6.1 | 27189253 |
eCl@ss 5.1/5.1.4 | 27189253 |
Product description (long) | DK CMC III I/O Unit For signal receiving and passing on control commands WHD: 138x40x132 mm Monitoring: > 8 digital inputs Control: > 4 Relais |