Support Arm, Height Adjustable for support arm systems CP 120

Support Arm, Height Adjustable for support arm systems CP 120

Offers enhanced ergonomics

6510340

$100.00
Descriptionoffers improved ergonomics with adjustment range for tall and short operators; for seated and standing work adjustable to up to 800 mm as required using an adjustment screw on the front of the support arm. Clip-off plastic panels for access to integral cable routing.
BenefitsComplete functional reliability – if the compression spring breaks the arm will remain in position
Precise coordination of the compression spring to the housing weight via an adjusting screw on the rear of the support arm
Tilting angle of the mounted housing is identical in every height position
Integral locking in three stages
Cables with connectors such as DVI and VGA are also easily inserted
Installation optionsMaximum cross-section for cable entry 18 x 39 mm
Maximum number of introduced cables 3x dia. 7 mm and 2x dia. 8.5 mm
ColorRAL 9006
Supply includesAssembly components
Note on Model No.Weight range applies to configured housing and vertical support section.
Weight range20kg...40kg
Packaging unit1 pc(s).
Weight/packaging unit19.2 kg (42.3 lb.)
EAN4028177598157
Customs tariff number73269098
Product description (long)CP Support arm height-adjustable for support arm system CP 120 L: 1090 mm for weight range 20-40 kg
More Info
Declarations
Manufacturer's declaration

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Documentation
Instructions
EPLAN Data Portal