Operating housing with handle strips

Operating housing with handle strips

Command panel with handle strips in contemporary design of sheet steel, with Ø 130 mm support arm cut-out to fit CP 60/120/180 support arm system, service access optionally from the front or rear, aluminum front panel easily removable for machining, protection category IP 55

6320500 / H: 380mm (14.96") W: 600mm (23.62") D: 210mm (8.27")

MaterialCover caps: Plastic
Front panel: Aluminum
Handle strips: Aluminum
Housing and door: Carbon steel
Surface finish Housing and door: Dipcoat primed powder-coated on the outside textured paint
Front panel: Natural anodized.
Handle strip: Natural anodized
ColorCover caps: Similar to RAL7024
Front panel: Natural anodized.
Handle strip: Natural anodized
Housing and door: RAL 7035
Protection category IP to IEC 60 529IP 55
Supply includesCam lock with 3 mm double-bit insert
Front with maximum cut-out covered with easily machinable 3 mm aluminum front panel
Housing with cut-out and reinforcement for support arm connection Ø 130 mm
Integral interior mounting bracket with TS system punchings
Side handle strips and cover caps
NotesOptional: Support arm connection Ø 130 mm preformed off-center in the reinforcement plate easily drilled out
The support arm connection and door catch may be swapped over by rotating the enclosure
Lock systems for servicing access from the rear: 27 mm lock inserts type A lock cylinder plastic handles and T-handles type B
Servicing access versionFrom the rear
DimensionsHeight: 380 mm (15 ")
Width: 600 mm (24 ")
Depth: 210 mm (8.3 ")
Lock versionCam
No. of locks1
Lock Insert3 mm double-bit
Packaging unit1 pc(s).
Weight/packaging unit15.4 kg (34 lb.)
Customs tariff number94032080
ETIM 6.0EC002504
ETIM 5.0EC002504
eCl@ss 8.0/8.127180505
eCl@ss 7.0/7.127180505
eCl@ss 6.0/6.127180505
eCl@ss 5.1/5.1.427180505
Product description (long)CP Operating housing with handle strips WHD: 600x380x210 mm Sheet steel handle strips made of aluminum Servicing access from the rear
More Info
Declaration of conformity


Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
EPLAN Data Portal