- Home
- CP 60 to CP 40 adapter for floor-mounted and support arm systems
CP 60 to CP 40 adapter for floor-mounted and support arm systems
CP 60 to CP 40 adapter for floor-mounted and support arm systems
6206650
New
This is a new product. This item is not yet available off the shelf.
Active
This article can be found in the active sales documents (Catalogue, price list or internet).
Passive
This article can no longer be found in the active sales documents. It will still be possible to deliver the article until the final end-of-life date.
Limited
This article is no longer being produced. Existing stocks are to be sold off.
Expired (EOS): End of Sales
This article is no longer available as a standard item and it is only retained for the provision of documentation for existing customers.
$0.00
Description | For the transition from CP 60 to 48 round pipe. |
---|---|
Installation options | For fastening to floor-mounted and support arm systems with CP 60 support section |
Material | Steel |
Color | RAL 7035 |
Supply includes | Seal Self-tapping screws for support section attachment Adaptor |
rigid | yes |
Packaging unit | 1 pc(s). |
Weight/packaging unit | 1.81 kg (4 lb.) |
EAN | 4028177709621 |
Customs tariff number | 76169990 |
ETIM 6.0 | EC000882 |
ETIM 5.0 | EC002620 |
eCl@ss 8.0/8.1 | 27400556 |
eCl@ss 7.0/7.1 | 27189261 |
eCl@ss 6.0/6.1 | 27189261 |
eCl@ss 5.1/5.1.4 | 27189247 |
Product description (long) | CP Adaptor CP 60 to CP 40 Combination of CP 60 and CP 40 directly on the CP 60 support section |
Related Categories
Recommended Products
- Part No. 2867000Base/plinth, complete, 100 mm Stainless steel, for one-piece consoles
H: 100mm (3.94") Cover: No
Where necessary, two base/plinths can be installed above one another. - Part No. 2736520System Window for TS, SE
H: 470mm (18.50") W: 500mm (19.69") D: 77mm (3.03")
Cover: No
To cover display and operating instruments or cut-outs, and provide protection from dirt... - Part No. 2482540Interface Covers, Modular
Cover: No
For universal use where rapid access to interfaces and outlets is needed, the housing... - Part No. 8700150Baying cover, top
Cover: No
Prevents dirt and moisture from collecting on the baying seal. - Part No. 6212540Connection Plates with reinforcement plate
Cover: No
For easy location of the command panel onto the support arm or pedestal. - Part No. 8200500Flex-Block trim panels, 200 mm, sealed for Flex-Block corner pieces
H: 200mm (7.87") Cover: No
For tool-free assembly. With symmetrical enclosure dimensions, trim panels have identical... - Part No. 3201960Toroidal Transformer Primary connection 115 V/400 V
H: 123mm (4.84") W: 105mm (4.13") D: 55mm (2.17")
Cover: No
- Part No. 6218820Wall/base mounting bracket CP 180, small
Cover: No
For rigid attachment of the support arm system to a vertical or horizontal surface. - Part No. 6450020TFT monitor
H: 354mm (13.94") W: 482mm (18.98") Cover: No
Mounting variant for surfaces and command panels.