System Support Rails

System Support Rails

For heavy installed equipment such as transformers. T-head screw and slot in the support rail accommodate all mounting dimensions.

4361000

$100.00
DescriptionUtilized to support heavy components (transformers motors drives pumps) that are mounted within the enclosure. T-head screw and slot in the support rail accommodate a wide range of mounting dimensions.
MaterialCarbon steel
Surface finish Zinc-plated
Supply includesFasteners
2 system support rails (45 x 25 mm)
4 T-head screws M12 x 60 mm
Suitable for600 mm (24 ")
Installation optionsin the case of SE may additionally be fitted to the horizontal section in the width at the bottom and top or in the depth at the bottom and top (without mounting plate) using snap-on nut 8800.808
On base configuration rail for CM
On the horizontal TS enclosure section: in the width in the depth (without mounting plate)
On the vertical TS SE enclosure section via snap-on nuts 8800.806 or via adapter rail for PS compatibility offset in the height via TS punched rail 25 x 38 mm
Packaging unit2 pc(s).
Weight/packaging unit3.02 kg (6.6 lb.)
EAN4028177099678
Customs tariff number73269098
ETIM 6.0EC001285
ETIM 5.0EC001285
eCl@ss 8.0/8.127189261
eCl@ss 7.0/7.123159101
eCl@ss 6.0/6.123159101
eCl@ss 5.1/5.1.427189250
Product description (long)SZ Free-standing enclosure system for W: 600 mm
More Info

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Documentation
Instructions
EPLAN Data Portal