LED compact system light

LED compact system light

Supply voltage: 24 V DC

4140810 / H: 32mm (1.26") W: 230mm (9.06") D: 20mm (0.79")

Function principleIntegral through-wiring.
Universal attachment options.
Vertically hinged light cone.
BenefitsEconomical energy use.
Low-maintenance with the use of LEDs.
Max. EMC capacity.
May be connected to a door-operated switch.
Protected with the safety extra-low voltage range
MaterialLight body: Extruded aluminum
Light cover: Polycarbonate (halogen-free)
Light ends: PC-ABS
ColorSimilar to RAL 7035
Protection category IP to IEC 60 529IP 20
Supply includesAssembly components
Light (bulb)
Light cover
LED compact system light
NotesOnly intended for use in enclosures and closed housings
The maximum rated current when installing luminaires is 2 A
When using on customer-supplied power packs it is important to obtain the requisite approvals depending on the application
DimensionsHeight: 32.8 mm (1.3 ")
Width: 230 mm (9.1 ")
Depth: 20.64 mm (0.81 ")
Voltage tolerance± 10 %
Installation optionsSE profiles to the side of roof frames: direct
TS horizontal profile from roof frames: direct
AE: with rail for interior installation
AE CM TP: with magnet mounting kit
SE profiles to the front and rear of roof frames: direct
TS SE vertical profile direct
Rated operating voltage24VDC
Rated insulation voltageDepending on the power supply
Rated impulse withstand voltage, phase to earthDepending on the power supply
Rated impulse withstand voltage, phase to phaseDepending on the power supply
Mounting dimensionsMounting distance – clip/magnet: 175 mm (6.9 ")
Mounting distance – screw attachment: 250 mm (9.8 ")
Equipment (electrical)Light (bulb): LEDs cool white
Switch (type): Integral on/off/door-operated switch mode
Number of LEDs: 10
Protection categoryIII (SELV)
Connection optionsThrough-wiring (configuration of row of luminaires)
Door-operated switch
Power supply through connector
Light – installation typeScrew fastening
Clip fastening
Magnetic fastener (accessories)
Light coveryes
Light cone adjustmentyes
Rated current (max)with DC: 0.04 A
Note: The maximum rated current when installing luminaires is 2 A
Packaging unit1 pc(s).
Weight/packaging unit0.24 kg (0.5 lb.)
Customs tariff number94054099
Product description (long)SZ System light LED compact WHD: 230x33x21 mm 24 V DC Integral on/off/door-operated switch mode
More Info
Declaration of conformity


Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
EPLAN Data Portal