- Home
- Manual hydraulic punch set, PG 9 - PG 48
Manual hydraulic punch set, PG 9 - PG 48
Manual hydraulic punch set, PG 9 - PG 48
Manual hydraulic punch in a practical set with hole punches
4055085
New
This is a new product. This item is not yet available off the shelf.
Active
This article can be found in the active sales documents (Catalogue, price list or internet).
Passive
This article can no longer be found in the active sales documents. It will still be possible to deliver the article until the final end-of-life date.
Limited
This article is no longer being produced. Existing stocks are to be sold off.
Expired (EOS): End of Sales
This article is no longer available as a standard item and it is only retained for the provision of documentation for existing customers.
$0.00
Description | Manual hydraulic punch set with hole punches for sheet steel. Maximum machinable material thickness 2 or 3 mm. |
---|---|
Benefits | Extend tool life with a built-in pressure relief valve |
Supply includes | 9 split sheet metal punch with 3-fold pitch HSS pilot drill Ø 10 mm Hydraulic screw Ø 19 mm Hydraulic screw Ø 9.5/19 mm Manual hydraulic punch Plastic case Spacer bushing set (3-part) |
PG size | 11 13 16 21 29 36 42 48 9 |
Ø hole punch | 15.2 mm 18.6 mm 20.4 mm 22.5 mm 28.3 mm 37 mm 47 mm 54 mm 60 mm |
Packaging unit | 1 pc(s). |
EAN | 4028177807969 |
Customs tariff number | 84678900 |
Product description (long) | Hand hydraulic punch set 90° PG 9 11 13 16 21 29 36 42 48 mm |
Related Categories
Recommended Products
- Part No. 6013100Display board with wall bracket
Cover: No
To accommodate test plans, documents etc. in A4 format, mounted on surfaces, in the 25... - Part No. 4055441Hole punch, special contour For sheet steel
Cover: No
For punching cut-outs with a special shape - Part No. 4055465Hole punch, heavy connectors For sheet steel
Cover: No
For punching rectangular cut-outs for connectors - Part No. 4055663Hydraulic tension screws
Cover: No
Accessories for hole punches. Required as a connecting part between the die and the stamp.... - Part No. 9670107Baying systems TS 8 Isolator enclosures
H: 2000mm (78.74") W: 1200mm (47.24") D: 800mm (31.50")
Cover: No
TS 8 baying system for the distribution of electrical power with switch disconnector ... - Part No. 4054315Cable stripper
Cover: No
For stripping cables and conductors. Self-adjusting, with ergonomically styled handle,... - Part No. 9674340Front trim panel for fuse-switch disconnector section
Cover: No
Cover above and below the installation area for the NH switch-disconnector fuse at the... - Part No. 4054003Crimping tool For wire end ferrules
Cover: No
For crimping wire end ferrules without an insulating sleeve according to DIN 46228 Part 1...