InRow LCP Direct Expansion, H 2000mm W 300mm D 1200mm, up to 20kw closed loop system

InRow LCP Direct Expansion, H 2000mm W 300mm D 1200mm, up to 20kw closed loop system

InRow Direct Expansion cooling up to 20kW. The closed loop cooling design captures the cold air and hot at the source with a solid front and rear door creating a built in cold aisle, hot aisle configuration. The fans direct the airflow sideways for efficient and effective air flow delivered direct to the equipment. Available with solid front and rear doors or any combination of the two for a hybrid design.

3311392

$100.00
Function principleLCP for use within a bayed enclosure suite. Hot air is drawn in from the aisle at the rear of the device cooled by the high-capacity compact impellers and blown back into the room or cold aisle after cooling
ColorRAL 7035
Protection category IP to IEC 60 529IP 20
NoteEthernet cable 2482.720 required with SNMP network card 3311.320
VariantRow Cooling
Total cooling output to DIN EN 14511:20 kW (68242 BTU)
Device modulates without interruption in the cooling output range between6kW - 20kW
Total cooling output/number of fan modules required
20kW
Number of fan modules in supplied state4
Total cooling output to DIN EN 14511Total cooling output: 20 kW
L 35 L 35: 20 kW
Air throughput (unimpeded air flow)4800 m³/h (2825.2 cfm)
Rated operating voltage380V - 480V 3~ 60Hz
DimensionsHeight: 2000 mm (79 ")
Width: 300 mm (12 ")
Depth: 1200 mm (48 ")
Temperature controlInfinitely variable fan control
Inverter-controlled compressor
Installation in bayed enclosureFlush
Temperature rangeStorage: -20°C...+60°C
Ambient temperature range: +15°C...+35°C
Cooling mediumR410a
Type of connection (electrical)Connection clamp
EC fanyes
Fans may be exchanged with the system operationalyes
Packaging unit1 pc(s).
Weight/packaging unit202 kg (445.3 lb.)
EAN91366
More Info
Approvals
UL + C-UL
Data sheets
Drawing
Safety data sheet