IoT interface

IoT interface

The IoT interface is used to network Rittal components such as Blue e+ cooling units, Blue e+ chillers, smart monitoring systems, etc. with the customer's own monitoring and/or energy management systems. Data can be integrated both horizontally and vertically into data collectors or processors. This enables long-term recording and evaluation of device data, statuses, and system messages.

3124300 / H: 117mm (4.61") W: 18mm (0.71") D: 120mm (4.72")

$100.00
BenefitsCentral module for the intelligent networking of Rittal products
Compatible with sensors up to 32 CMC III and the smart monitoring system
The IoT interface is a middleware which enables devices/systems to communicate with one another. The data can then be transferred on to higher-level systems.
Simple connection of up to two Bluee+ cooling units or chillers
MaterialPlastic to UL 94-V0
Temperature range+0°C...+70°C
DimensionsHeight: 117 mm
Width: 18 mm
Depth: 120 mm
ColorRAL 7016
Protection category IP to IEC 60 529IP 20
Type of connection (electrical)Push-in spring terminal (24 V DC)
Supply includesAngle bracket for Blue e+ cooling unit
USB cable (USB A plug on a micro USB B plug)
IoT interface
NoteThe IoT interface is only supported by the Blue e+ cooling units from Firmware 1.11.0. If necessary run a firmware update using the RiDiag III (3159.300) software.
Mounting tipThe IoT interface can be secured using a spring-loaded metal clamp on a 35 x 7.5 top hat rail according to DIN EN 60715 or by means of an angle bracket on the rear of a Blue e+ cooling unit.
ProtocolsModbus/TCP
SNMPv1
DHCP
DNS
FTP
HTTP
HTTPS
LDAP
NTP
OPC-UA
Radius
SFTP
SMTP
SNMPv2c
SNMPv3
SSH
Syslog
TCP/IPv4
TCP/IPv6
Telnet
General aspects1 x acknowledgment button
1 x Micro SD memory card slot for SD 2.0
1 x Micro USB type B (device) for USB 2.0
1 x push-in spring terminal for NTC sensor
1 x USB 2.0 high-speed functions (EHCI)
2 x RJ45 jack for RS 485 interface (climate control unit interface)
Network interfaceEthernet according to IEEE 802.3 via 10BASE-T 100BASE-T and 1000BASE-T
Ethernet IPv4/IPv6
Suitable forBluee+ chiller
cooling units Bluee+
CMC III sensors
Smart Monitoring System
Packaging unit1 pc(s).
EAN4028177924369
Customs tariff number85234920
Product description (long)SK IoT Interface for networking of Rittal components for Blue e+ cooling units/Chiller WHD: 18 x 117 x 120 mm
More Info
Declarations
Declaration of conformity
Open CAD drawing in new tab
Data sheets
Technical system catalogue
Documentation
Brief instruction
Instructions
Drivers/software
Driver
Software
Specialist literature
The Rittal technology library