IoT interface

IoT interface

The IoT interface is used to network Rittal components such as Blue e+ cooling units, Blue e+ chillers, smart monitoring systems, etc. with the customer's own monitoring and/or energy management systems. Data can be integrated both horizontally and vertically into data collectors or processors. This enables long-term recording and evaluation of device data, statuses, and system messages.

3124300 / H: 117mm (4.61") W: 18mm (0.71") D: 120mm (4.72")

$0.00
BenefitsCentral module for the intelligent networking of Rittal products
Compatible with sensors up to 32 CMC III and the smart monitoring system
The IoT interface is a middleware which enables devices/systems to communicate with one another. The data can then be transferred on to higher-level systems.
Simple connection of up to two Bluee+ cooling units or chillers
MaterialPlastic to UL 94-V0
Temperature range+0°C...+70°C
DimensionsHeight: 117 mm
Width: 18 mm
Depth: 120 mm
ColorRAL 7016
Protection category IP to IEC 60 529IP 20
Type of connection (electrical)Push-in spring terminal (24 V DC)
Supply includesAngle bracket for Blue e+ cooling unit
USB cable (USB A plug on a micro USB B plug)
IoT interface
NoteThe IoT interface is only supported by the Blue e+ cooling units from Firmware 1.11.0. If necessary run a firmware update using the RiDiag III (3159.300) software.
Mounting tipThe IoT interface can be secured using a spring-loaded metal clamp on a 35 x 7.5 top hat rail according to DIN EN 60715 or by means of an angle bracket on the rear of a Blue e+ cooling unit.
ProtocolsModbus/TCP
SNMPv1
DHCP
DNS
FTP
HTTP
HTTPS
LDAP
NTP
OPC-UA
Radius
SFTP
SMTP
SNMPv2c
SNMPv3
SSH
Syslog
TCP/IPv4
TCP/IPv6
Telnet
General aspects1 x acknowledgment button
1 x Micro SD memory card slot for SD 2.0
1 x Micro USB type B (device) for USB 2.0
1 x push-in spring terminal for NTC sensor
1 x USB 2.0 high-speed functions (EHCI)
2 x RJ45 jack for RS 485 interface (climate control unit interface)
Network interfaceEthernet according to IEEE 802.3 via 10BASE-T 100BASE-T and 1000BASE-T
Ethernet IPv4/IPv6
Suitable forBluee+ chiller
cooling units Bluee+
CMC III sensors
Smart Monitoring System
Packaging unit1 pc(s).
EAN4028177924369
Customs tariff number85234920
Product description (long)SK IoT Interface for networking of Rittal components for Blue e+ cooling units/Chiller WHD: 18 x 117 x 120 mm
More Info
Declarations
Declaration of conformity

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
Technical system catalogue
Documentation
Brochure
Brief instruction
Instructions
Instructions spec
Drivers/software
Driver
Software
EPLAN Data Portal