- System Covers
For conductor connection clamps and plate clamps.
/ W: 200mm (7.87")
D: 110mm (4.33")
This is a new product. This item is not yet available off the shelf.
This article can be found in the active sales documents (Catalogue, price list or internet).
This article can no longer be found in the active sales documents. It will still be possible to deliver the article until the final end-of-life date.
This article is no longer being produced. Existing stocks are to be sold off.
Expired (EOS): End of Sales
This article is no longer available as a standard item and it is only retained for the provision of documentation for existing customers.
|Description||For conductor connection clamps and plate clamps.|
|Material||Fire protection corresponding to UL94-V0|
|Notes||For 3-pole systems with 60/100 mm bar center distance|
For systems with a base tray the system covers must be mechanically shortened
Only suitable for use with systems without a base tray
|Dimensions||Width: 200 mm (7.9 ")|
Depth: 110 mm
|Height when mounting on busbar systems||with 100 mm center-to-center spacing: 325 mm (13 ")|
with 60 mm center-to-center spacing: 230 mm (9.1 ")
|Packaging unit||4 pc(s).|
|Weight/packaging unit||2.6 kg (5.7 lb.)|
|Customs tariff number||85472000|
|Product description (long)||SV System cover WD: 200x110 mm H: 230-325 mm|
- Part No. 9344540Connection Compartment Cover for NH fuse-switch disconnectors
For extending the contact hazard protection cover, e.g. when using ring terminals with...
- Part No. 9342720Insert strip for circuit-breaker component adapters
W: 25mm (0.98") Cover: No
To extend the construction width.
- Part No. 3427020Contact hazard protection cover for bus-mounted fuse bases
The cover ensures contact hazard protection from the front, top and below.