System Window for TS, SE

System Window for TS, SE

To cover display and operating instruments or cut-outs, and provide protection from dirt and moisture as well as unauthorized access.

2735500 / H: 270mm (10.63") W: 500mm (19.69") D: 47mm (1.85")

$100.00
Version30 section
DescriptionUtilized to cover display and operating instruments or cut-outs and provide protection from dirt and moisture as well as unauthorized access.
BenefitsBase frame: Conceals the cut edge.
Easily screw-fastened to the door thanks to modified dimensions (tubular door frame may be used as a drilling template).
Frame section height 30 mm or 60 mm
Readily height-adjustable.
Stabilizes the door cut-out.
There is no dirt on the seal the glass is protected from being lifted out dirt cannot drop inside and moisture cannot run behind the window when opening.
Viewing window: Hinge with 180° opening angle easily inserted.
Made from single-pane safety glass: high level of resistance to solvents and scratches anti-static reduced risk of injury if broken.
MaterialExtruded aluminum section with die-cast zinc corner pieces and single-pane safety glass.
Surface finish Base frame: Powder coated on the outside in RAL 7035
Hinge and lock section: Natural-anodized
Protection category IP to IEC 60 529IP 54
Enclosure typeSE
TS 8
Suitable for600 mm (24 ")
NotesStandard double-bit lock insert may be exchanged for lock inserts 27 mm type A and/or for lock system Ergoform-S (except H = 270 mm).
DimensionsHeight: 270 mm (11 ")
Width: 500 mm (20 ")
Depth: 47 mm (1.9 ")
Viewing windowsHeight: 198 mm (7.8 ")
Width: 363 mm (14 ")
Build depth for components (max.)33 mm (1.3 ")
Packaging unit1 pc(s).
Weight/packaging unit3.3 kg (7.3 lb.)
EAN4028177476288
Customs tariff number76101000
Product description (long)FT System window for TS SE 30 section WHD: 500x270x47 mm for W: 600 mm
More Info
Certificates
EAC

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab