Interface flap For earth leakage circuit-breakers

Interface flap For earth leakage circuit-breakers

According to the future EN 60204-1 standard, all power circuits with a rated current of ≤ 20 A that supply the outlets in or on machine enclosures must be protected by means of a residual-current device with a rated differential current ≤ 30 mA. Prepared for the installation of commercially available, 2-pole FI/LS circuit breaker.

2482600 / H: 127mm (5.00") W: 131mm (5.16")

$100.00
DescriptionAccording to the future EN 60204-1 standard all power circuits with a rated current of ≤ 20 A that supply the outlets in or on machine enclosures must be protected by means of a residual-current device with a rated differential current ≤ 30 mA. Prepared for the installation of commercially available 2-pole FI/LS circuit breaker.
BenefitsProtection against leakage currents and overload
Spring mechanism raises the unclosed cover 30°. This makes it impossible to forget to close the cover.
Standard-compliant protection as per EN 60 204
The ground fault circuit interrupter can be reset without opening the enclosure
Applicationsas maintenance access for networks
as programmer interface for controllers
for programming and maintenance of integral components
For quick connection to existing network structures
For temporary connection of additional equipment
Function principleThe snap fit closure ensures a good seal. The cover can be locked if necessary.
MaterialPlastic flap: Polycarbonate (semi-transparent)
Mounting frame: Plastic PBT (black)
Protection category IP to IEC 60 529IP 65
Supply includes3 mm double-bit with insertable rotary knob
Interface flap complete consisting of plastic frame outlet (VDE) RJ 45 (socket/socket Cat 5e) and cut-out for ground fault circuit interrupter
Knockouts for USB A (socket/socket) provided
Notesinterface flap may only be used when a ground fault circuit interrupter is fitted
Rated operating voltage250V 1~ 50Hz/60Hz
DimensionsHeight: 127 mm (5 ")
Width: 131 mm (5.2 ")
Required mounting cut-outHeight: 91 mm (3.6 ")
Width: 117 mm (4.6 ")
Installation dimensions70 mm (2.8 ")
Rated current10A - 16A
Packaging unit1 pc(s).
Weight/packaging unit0.58 kg (1.3 lb.)
EAN4028177803732
Customs tariff number85366990
ETIM 6.0EC002625
ETIM 5.0EC002608
eCl@ss 8.0/8.127189234
eCl@ss 7.0/7.127189234
eCl@ss 6.0/6.127189234
eCl@ss 5.1/5.1.427189238
Product description (long)SZ Interface flap complete mounting frame and interface inserts with plastic flap semi-transparent RJ45 sockel modules Germany knock-out for RDC protective switch
More Info
Declarations
Declaration of conformity

Drawings

Format Dimension Drawing Filename  
Open CAD drawing in new tab
Data sheets
General technical information
Technical details
Documentation
Instructions